|
Product Details:
|
| Number Of Pins (Poles)t: | 1 Pins | Terminal Size: | 6mm |
|---|---|---|---|
| Shell Materials: | Plastic | Plug Type: | Straight |
| CPA: | With | Keyway /Poka-yoke: | A:black, B:Red, C: White, D:Green |
| Cable Connection Method: | B: Busbar, T: Threaded, C:Crimping | Threaded Hole Size (Busbar & Threaded): | M5*0.8 Thread |
| EMI Shielded: | Optional | Insulation Resistance: | ＞200mΩ |
| Rated Voltage: | 1000VDC/AC | Rated Current: | 100A/16mm2, 120A/25mm2 |
| Dielectric Voltage: | 3500VAC/6000VDC | Shielded Efficiency: | 70dB( 10KHz-5Mhz) 65 DB(5MHz-500MHz) |
| HVIL: | Optional | Mating Cycle: | ≥100 Times |
| Applicable Cable Size: | 16mm2, 25mm2 | Vibration: | LV215 |
| IP Grade (mated): | IP 6K9K/IPX8/IPXXD | IP Grade (unmated): | IPXXB |
| Touch Proof: | DIN EN60529 | Operational Temp.: | -40℃ ~125℃ |
| Application: | Battery Pack, Motor, PDU, Charging Systems, Inverters | ||
| Highlight: | IP6K9K 6mm Power Connector,Single Pin 6mm Power Connector,120A Waterproof Battery Connectors |
||
Part No.:NPFPP1P6.0
Description:
This product is vehicle mounted high-voltage plastic shell connector, suitable for lithium battery packs for electrical motorcycle, scooter, marine, boat, RV application
Car batteries typically have one of three types of terminals.
In recent years, the most common design has been the SAE post, consisting of two frusto-conical lead posts sitting on top of the cell, with slightly different diameters to ensure correct polarity.
The "JIS" type is similar to SAE but smaller, again positively larger than negatively larger but both smaller than the SAE counterpart. Most older Japanese cars have JIS terminals.
General Motors and other automakers have also started using jamb battery terminals, which consist of two female 3/8" female threads (SAE 3/8-16) into which the bolts or various battery terminal adapters will attach. These jambs are the same size and do not prevent wrong polarity connections.
L-terminals consist of an L-shaped post with a bolt hole in its vertical side. These are used in some European cars, motorcycles, lawn and garden equipment, snowmobiles and other light vehicles.
Application:
Parameters:
| Basic Feature | |
| Number of Pins (Poles) | 1 pin |
| Terminal Size | 6mm |
| Shell Materials | Plastic |
| Plug Type | Straight |
| CPA | With |
| Keyway /Poka-yoke | A:black, B:Red, C: White, D:Green |
| Cable Connection Method | B: Busbar, T: Threaded, C:Crimping |
| Threaded Hole Size (Busbar & Threaded) | M5*0.8 thread |
| EMI Shielded | Optional |
| Electrical Characteristics | |
| Insulation Resistance | ＞200mΩ |
| Rated Voltage | 1000VDC/AC |
| Rated Current | 100A/ 120A |
| Dielectric Voltage | 3500VAC/6000VDC |
| Shielded Efficiency | 70dB( 10KHz-5Mhz) 65 dB(5MHz-500MHz) |
| HVIL | Optional |
| Mechanical Characteristics | |
| Mating Cycle | ≥100 times |
| Applicable Cable Size | 16mm2, 25mm2 |
| Vibration | LV215 |
| IP Grade (mated) | IP 6K9K/IPX8/IPXXD |
| IP Grade (unmated) | IPXXB |
| Touch Proof | DIN EN60529 |
| Environmental Characteristics | |
| Operational Temp. | -40℃ ~125℃ |
| Other | LV215 |
| Application | |
| Battery Pack, Motor, PDU, Charging Systems, Inverters | |
Product Pictures:
Drawings:
Company Profile
NeoPower is dedicated to high-voltage/ high-current waterproof connectors & cables, applicable for new energy battery pack, EV, heavy-duty machinery, industrial connection, powertrain system, solar/wind energy storage, smart grid, AGV, etc.
NeoPower has two manufacture bases located in Huizhou, Guangzhou Province for plastic shell connectors, and in Changzhou, Jiangsu Province for metal shell connectors respectively. With rich expertise and high-standard management, NeoPower delivers top quality products and excellent services to customers around the world.
Certifications & Approvals
The company has passed IATF 16949:2016, ISO 9001:2015 quality control system, and its products are CE, TVU, RoHs approved.
Contact:
Contact Person: Vivian Choi
Email: neopowertech@hotmail.com
Contact Person: Ms. Vivian Choi
Tel: 86-18988747618
